Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Cypress, CA
Cypress, CA is a master-planned city where most homes were built between the early 1960s and the 1980s. That means the gates standing on those driveways today are often 30 to 50 years old. We’re a multi-brand gate specialist serving all of Cypress in the 90630 ZIP code, handling everything from a full gate installation to a bent arm or a dead control board. If your gate has failed in Cypress, call (866) 371-3309 and we’ll diagnose what’s actually wrong.
Why Cypress Homes Are Different
The gate work we do in Cypress rarely looks like the work we do in newer cities. Cypress is dominated by single-family tract homes built from the late 1950s through the 1980s, and a lot of those original gates are still standing. Wooden driveway gates that have been baking in the Southern California sun for four or five decades are warped, cracked, and faded, often with that distinctive orange-peel texture that comes from years of unpainted exposure. The hardware underneath is worse. Hinges on those original Cypress gates were frequently not galvanized, so they rust from the inside out while looking passable on the surface. We see the same pattern across the city’s 1960s and 1970s subdivisions: a gate that sags, drags, or binds because the hinge pin has rusted away inside the barrel.
Then there’s the metal side. Cypress’s warm, dry summers are easy on a lot of things, but sprinkler overspray and the occasional coastal moisture push rust through powder-coated steel and wrought-look iron, especially at the bottom rail and the hinge mounts. Santa Ana winds add another layer of stress, working hinges and latches loose until the gate no longer closes square. Cypress tract lots also tend to have consistent dimensions, narrow side yards and standard two-car driveways, so when a gate fails here we usually know the frame and hardware before we arrive.
Styles & brands we work with
Our Main Cypress Services
The two calls we get most from Cypress homeowners are for gates that have stopped closing/opening properly and for electric gates that have gone dead entirely. Here’s how each works in Cypress.
Gate Repair in Cypress
Most Cypress gate repairs come down to original hardware that has finally given out. A wooden gate from a 1970s tract home will warp and sag until the latch no longer lines up, or a hinge will snap because the pin rusted through. Metal gates suffer the same fate at the bottom hinge, with the added problem of rust jacking through the frame. We replace the failed component, reinforce the post if needed, and realign the gate so it closes properly the first time. If your Cypress gate is dragging on the concrete or swinging loose, see Gate Repair in Cypress for the full scope.
Electric Gate Repair in Cypress
Automated gates fail differently than manual ones, and in Cypress the most common culprits on older systems are the control board, the safety loop, the motor capacitor, or the wiring run to the keypad. We trace the fault, board, loop, motor, or wiring, and fix the actual cause rather than guessing. A stuck electric gate isn’t just an inconvenience, it’s a security gap for the whole property. We work on LiftMaster, FAAC, BFT, Linear, and Viking systems among others. For a full breakdown of what electric gate repair covers in Cypress, see Electric Gate Repair in Cypress.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Cypress
A new gate installation in Cypress usually means replacing a gate that was installed with the original tract home, so the job is often as much about correcting the old framing and post condition as it is about hanging a new gate. Dry summers and Santa Ana winds have had decades to work on the old hardware, and many Cypress homeowners decide a full replacement makes more sense than another repair. From a bent arm to a full installation, the same specialist handles it start to finish. See our Gate Installation service hub for the full national scope, then read the Cypress-specific details below.
Automatic Gate Installation
Signs you need it
Your current gate is manual but the driveway layout makes getting out of the car impractical, or an older operator has failed so completely that repairing it would cost more than replacing the whole system.
What it costs in Cypress
Automatic gate installation in Cypress typically runs $2,000 to $5,500 for a single swing gate with a new residential operator, and $3,500 to $8,000 when the job includes a new gate frame and safety loops.
How we do it
We inspect the post and hinge structure, install the operator and control board, run the power and safety loop wiring, and program the remotes and keypad before testing the full open/close cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rotted, sagging beyond adjustment, or built on a frame that was not designed to support the weight it carries, making it a candidate for full replacement rather than patchwork.
What it costs in Cypress
Driveway gate installation in Cypress generally falls between $1,200 and $4,500 for a manual residential gate including hardware and posts, with automatic versions running higher depending on the operator brand selected.
How we do it
We remove the old gate and hardware, set or reinforce the posts, hang the new gate with galvanized hinges, and align the latch and stop so the gate closes square and secure.
Sliding Gate Installation
Signs you need it
Your driveway has a steep approach or limited swing clearance, making a sliding gate the only layout that will actually work without binding or blocking the sidewalk.
What it costs in Cypress
Sliding gate installation in Cypress is priced per linear foot of track and gate, with most residential jobs landing between $2,500 and $7,500 depending on the gate length and operator requirements.
How we do it
We set the track and foundation plates, install the gate panels and roller assembly, wire the operator and safety edges, and test the full travel with the stops correctly placed.
What Gate Installation Costs in Cypress
| Item | Typical range in Cypress |
|---|---|
| Manual driveway gate replacement | $1,200 – $4,500 |
| Automatic single swing gate with operator | $2,000 – $5,500 |
| Sliding gate with track and operator | $2,500 – $7,500 |
Prices above cover typical Cypress residential gates. What pushes a job higher here is a rotten post that has to be replaced, a concrete pour for a sliding track, or an upgrade to a commercial-grade operator. Every quote is agreed before work starts, so the number we give you is the number you pay.
Is a permit required for a gate installation in Cypress?
Most single-family residential gate replacements in Cypress do not require a permit if you are not changing the driveway approach or building a new fence line. If we are automating a gate for the first time, the electrical run and operator placement may need an inspection. We handle the details and tell you if anything is required before work begins.
How long does a gate installation take in Cypress?
A manual gate replacement is usually a half-day job once materials are on site. Automatic installations take a full day to a day and a half because of the wiring, programming, and safety loop testing. We will give you a clear timeline at the quote so you know what to expect on installation day.
Brands We Service in Cypress
We service nine gate-operator brands across the full market, from consumer-grade residential systems like Mighty Mule and Ghost Controls to professional commercial operators like FAAC, BFT, DoorKing, and LiftMaster. Nine brands. One call. We stock common LiftMaster, FAAC, BFT, and Linear parts locally, which keeps most Cypress repairs from waiting on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Cypress, CA
| Service | Typical range in Cypress |
|---|---|
| Manual driveway gate replacement | $1,200 – $4,500 |
| Automatic single swing gate with operator | $2,000 – $5,500 |
| Electric gate installation with gate and operator | $3,500 – $8,000 |
| Sliding gate with track and operator | $2,500 – $7,500 |
| Electric gate system full replacement | $2,000 – $6,000 |
| Slide gate operator replacement | $1,400 – $3,500 |
| Gate hinge replacement | $80 – $300 |
| Gate latch replacement | $50 – $220 |
| Gate cable/roller replacement | $100 – $400 |
| Gate alignment and sag correction | $120 – $380 |
| Gate opener sensor replacement | $150 – $450 |
| Gate control board replacement | $300 – $900 |
What pushes a Cypress quote toward the top of any range is usually the age of the original framing. A 1970s tract-home gate often has a post that is rotted below grade or set in concrete that has cracked, and that post work adds to the total. The one thing that does not change is the price once we quote it: every estimate is agreed before work starts, and we do not come back with a surprise invoice.
Neighborhoods We Serve in Cypress
We work throughout Cypress in the 90630 ZIP code, covering the original tract subdivisions that define the city’s housing stock. Response times across Cypress are typically same-day or next-day depending on our schedule, and emergency gate-stuck calls are treated as a priority. We regularly work in:
- Cypress Village
- College Park
- Greenbrook
- Los Alamitos Tract area
- Sorrento
Service Area – Cities Near Cypress
Our Cypress route regularly includes work in the surrounding cities, so if your property sits on the border of the 90630 ZIP you’re still in our service area. We handle gate jobs in La Palma, CA, Stanton, CA, Buena Park, CA, and Garden Grove, CA. If you’re not sure whether the address is within our Cypress service area, call and we’ll confirm before any dispatch.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cypress
In most cases, yes. We keep our Cypress route staffed for same-day and next-day repair calls, and we treat a gate that is stuck open or stuck closed as a priority because it changes the security of the entire property. Call (866) 371-3309 and we will give you an honest arrival window.
Some Cypress neighborhoods have HOAs with architectural guidelines that require approval before a new gate goes in, particularly if the gate faces the street. Automatic gate installation may also trigger a review because of the operator and keypad placement. We will flag it if your neighborhood has known restrictions, and we can install to whatever standard the HOA requires.
Yes. We work on single-family driveway gates across the tract-home subdivisions and on commercial gates for Cypress’s multi-unit properties and business parks. The difference is usually the operator: residential systems tend toward Mighty Mule, Ghost Controls, and LiftMaster, while commercial sites more often run FAAC, BFT, DoorKing, Linear, or Viking. We service all of them.
If your gate in Cypress is stuck, sagging, dead, or just due for replacement, call Montclair Gate Repair at (866) 371-3309 for a free estimate. We diagnose the actual fault, quote the price up front, and we service your brand from Mighty Mule to DoorKing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cypress Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Amanda Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Terrence Grant"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Claudia Mendoza