Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Aliso Viejo, CA | Montclair Gate Repair
Ghost Controls gate repair in Aliso Viejo costs roughly $220 to $410 for the most common fixes: board replacements, limit resets, battery swaps, and hinge realignment. We’re an independent crew, not a Ghost Controls dealer, and we service its solar and AC swing and slide operators across 92656 and 92698 every week. What makes our work different here comes down to one thing Aliso Viejo doesn’t share with most Orange County cities: nearly every gate went in during a single master-planned build-out window, and a lot of Ghost Controls units are retrofits bolted to builder-grade gate leaves that were never re-engineered for automation. That changes which parts fail and why. Call us at (866) 371-3309 for a free estimate, and we’ll tell you straight whether the operator is worth saving.
Why Aliso Viejo Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment often enough — including Ghost Controls service in Laguna Woods — that we know its failure patterns before we pull up. The boards cook in direct sun. The limits drift after wind events. The batteries in solar kits give out on hillside driveways where running 120V was never practical. Our owner, Noel Carrasco, grew up off Monte Vista Avenue in Montclair and spent two decades fixing gates across the Inland Valley before building this company. He’s the kind of technician who will tell you a $60 battery fix is all you need when that’s the truth.
For Ghost Controls sales & service, we default to genuine Ghost Controls boards, arms, and harnesses when the unit is current. You’ll also get straight answers on repair versus replace, because a 20-year-old operator on a gate that’s also 20 years old may be money better spent toward new hardware. That’s the conversation we have every month somewhere in Aliso Viejo service area.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Aliso Viejo
These are the failures we see most in Aliso Viejo, and each one is tied to something specific about this city: the sun exposure, the wind, the slopes, or the age of the original gate hardware. The same patterns show up in our Ghost Controls repair in Laguna Hills calls.
- UV-baked control boards and keypads. Aliso Viejo’s stucco gate posts and entry boxes face long hours of south Orange County sun, plus dry summer heat. Ghost Controls boards mounted in sun-facing enclosures fail well before the motor does. We replace the board, and we’ll relocate or shield the enclosure so the same failure doesn’t come back in two years.
- Limit and position faults after Santa Ana winds. A wind event racks the gate leaf against its hinge posts. The Ghost Controls arm gets pushed past its learned travel, and the controller flags a limit fault. The real problem is usually mechanical, not electronic. We re-level the gate, then reprogram the limits. In Aliso Viejo, we fix this before we ever touch the board.
- Battery and solar-charge failures on hillside driveways. Aliso Viejo has a lot of graded lots where running conduit to a gate was never practical, so solar Ghost Controls kits got installed. After a few years, the sealed battery stops holding a charge. We test the solar output first, then replace the battery with a proper deep-cycle unit so the gate doesn’t die nightly.
- Gearbox and arm binding from slope-graded posts. When a hinge post settles even half an inch on a slope or next to a retaining wall, the gate no longer swings true. The operator fights it every cycle. The first sign is usually a loud groan or a jerky open. We correct the hinge geometry and re-shim the post; replacing the arm without fixing the post just burns a second arm.
- Retrofit units mounted to manual-gate hardware. Aliso Viejo’s gates mostly date to the 1990s and 2000s build-out. A lot of Ghost Controls operators were added later by contractors who reused the original builder hinges and brackets. Those parts were sized for hand operation, not the constant torque of a motor. We re-engineer the mounting points when needed, and we match the community’s original look.
Ghost Controls Service in Aliso Viejo: What Local Conditions Mean for Your Equipment
Aliso Viejo incorporated in 2001, later than nearly everything around it. That’s not a trivia point for a gate tech, because it means almost every residential gate in this city was installed during the master-planned build-out of the 1990s and early 2000s. The original gates went in as manual leaves or basic operator models, then Ghost Controls units got retrofitted onto them as owners upgraded. The mounting hardware often wasn’t changed. We’ve pulled operators off gates in Glenwood and found the post brackets were the same light-gauge steel a hand-swing gate came with. Over two decades of automation cycles, those brackets flex, the gate drifts off true, and the operator burns boards and gears trying to move a gate that’s now fighting its own hinges. In a flat city, a board replacement might end the ticket. In Aliso Viejo, the board failure is often the symptom, and the post geometry is the disease. We fix both.
Ghost Controls Models & Products We Service in Aliso Viejo
We handle the full Ghost Controls lineup: the AXS-series heavy-duty single swing kits, the standard-duty dual swing twin-gate packages, solar and battery-backup swing operators with keypad and remote accessories, and tube-gate slide kits. Our parts approach is simple. When the unit is current, we install genuine Ghost Controls boards, arms, and battery harnesses. When a part is discontinued or backordered, we use quality aftermarket batteries, keypads, and hinge hardware rather than making you wait four weeks. Either way, we’ll always tell you which we’re using and why, so there’s no surprise on the invoice.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Aliso Viejo
Here’s what Ghost Controls repairs typically run in Aliso Viejo. We quote every job before parts go in, so you know the number before we start.
- Diagnostic service call: $79 to $129
- Ghost Controls limit reset / reprogramming: $120 to $180
- Control board replacement: $210 to $340
- Battery or solar-charge repair: $95 to $240
- Gearbox or arm replacement: $260 to $410
- Hinge and post realignment on slope-graded Aliso Viejo gates: $190 to $320
What drives the cost is usually the difference between a part swap and a geometry fix, plus whether the gate sits on a slope where getting it square takes extra work. The free estimate covers the diagnostic and a written price. Call (866) 371-3309 for an exact quote, and we’ll give you a number before you spend a dollar.
Serving Aliso Viejo, CA — Our Local Coverage Area
We’re based in the Aliso Viejo area and also provide Ghost Controls repair in Irvine, Laguna Hills, and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Aliso Viejo
Do you work on Ghost Controls operators mounted to original builder gates in Aliso Viejo’s master-planned communities?
Yes, that’s most of what we see here, and it’s exactly the scenario we’re set up for. The 1990s and 2000s build-out means most Ghost Controls units in Aliso Viejo are retrofits onto builder-grade gate leaves, so we check the original hinge and post hardware along with the Ghost Controls board and arm, then quote the full fix. Call us at (866) 371-3309 and we’ll set up a visit.
My Ghost Controls gate faults after every Santa Ana wind event – what’s actually wrong?
In Aliso Viejo, the wind load pushes the gate leaf against its hinge posts and shifts it slightly, so the arm travels past its learned limits and the controller flags a fault. It’s usually a mechanical issue, not a bad board. We re-level and re-shim the gate, replace the limit settings, and it stays fixed through the next wind event.
Can you replace a Ghost Controls battery or solar setup without running new power to my hillside driveway gate?
Yes. We replace Ghost Controls solar and battery-backup components on hillside properties in 92656 and 92698 all the time, so we can usually swap the battery, test the panel, and restore operation without trenching new line. The quote comes free if you call (866) 371-3309.
Will a Ghost Controls repair change how my gate looks and trip an HOA design review?
No, because we match the original gate architecture and mounting appearance. Aliso Viejo HOA communities like Glenwood and West Park have strict design review, and we keep repairs visually identical to the original, so you don’t end up in front of an architectural committee over a motor swap.
Is a 20-year-old Ghost Controls operator in Aliso Viejo worth repairing?
Sometimes, but often not when the gate itself is the same age and the hardware underneath was never built for automation. We’ll tell you the repair price, what a replacement costs, and which makes more sense for your specific community, gate, and slope. Call (866) 371-3309 and we’ll walk you through it over the phone.
Service Areas Near Aliso Viejo
Our Ghost Controls service in Quail Valley and Ghost Controls service in Canyon Lake run the same playbook we use in Aliso Viejo: factory-correct parts, straight pricing, and a tech who knows the operator before he opens the panel. We also cover nearby Orange County communities including Orange, North Tustin, and Buena Park, plus the Inland Empire corridor through Grand Terrace, San Bernardino, and Woodcrest.
Book Your Ghost Controls Service in Aliso Viejo Today
Call (866) 371-3309 and tell us what the gate is doing or not doing. We’ll give you a free estimate and, if you need us today, we’ll do what we can to get a tech to Aliso Viejo the same day.
Written by Noel Carrasco, Owner at Montclair Gate Repair, serving Aliso Viejo and the surrounding communities.