Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pedley, CA
Gate installation in Pedley usually runs between $1,800 and $7,500 depending on whether you’re adding an opener to an existing manual gate or building a full automated driveway system from scratch. Most Pedley properties sit on larger lots with long driveways, so sliding gates and heavy swing gates dominate the work here, and the unincorporated Riverside County setting means gate permits go through the county rather than a city building department. Montclair Gate Repair has served Pedley since 2013, and we handle everything from a single gate arm replacement to a full commercial-grade automated entry. Call (866) 371-3309 for a free estimate.
Why Pedley Homes Are Different
Pedley isn’t a typical Inland Empire suburb with uniform HOA gates and tightly packed lots. This is an unincorporated Riverside County community between Jurupa Valley and the Santa Ana River corridor, where many homes date to the mid-century era and sit on generous, irregular parcels. You’ll see long ranch driveway entries, farm-style tube gates, older wrought iron, and chain-link gates that were never designed for automation but have had openers bolted on over the years. That mix creates repair and installation conditions you don’t find in newer tract developments.
The climate works against gate hardware year-round. Pedley summers push past 100 degrees regularly, and Santa Ana winds blow dust and grit from the river bottom into rollers, tracks, hinges, and opener chains. We routinely see sealed bearings worn out in two years, sun-baked powder coating peeling off steel frames, and motors running hot because cooling fins are packed with dust. When we build a gate in Pedley, we spec sealed bearings and dust-tolerant hardware as a baseline, not an upgrade. That’s the difference between a gate that lasts five years and one that lasts fifteen.
Styles & brands we work with
Our Main Pedley Services
Two services dominate the calls we get from Pedley homeowners: repair work on gates that have failed or seized, and electrical troubleshooting on automated systems that won’t open or close. Here’s what each one involves locally.
Gate Repair in Pedley
A gate that drags on the ground, won’t latch, or sticks halfway open is usually a mechanical problem: worn rollers, a bent arm, a sagging hinge, or a warped post. On Pedley’s older properties, we also see a lot of sun-damaged wood gates and corroded chain-link hardware on the long ranch entries. We straighten, replace, reinforce, and recalibrate so the gate moves cleanly on its track or swing arc. If the motor is fine, we don’t sell you a new one. See our dedicated page for the full breakdown: Gate Repair in Pedley.
Electric Gate Repair in Pedley
Electric gate failures in Pedley are often electrical rather than mechanical: a dead control board, a safety loop that’s been cut by a tractor or grading blade, a burned capacitor from heat stress, or wiring that’s been nibbled by rodents in a detached shop. We trace the fault from the operator back through the loops, photo eyes, and power supply, then replace or rewire only what failed. You get a diagnosis, not a parts swap. Full details here: Electric Gate Repair in Pedley.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pedley
Gate installation in Pedley means building for long driveways, wide clearances, and county-level code requirements rather than city ones. Whether you’re adding an opener to a 20-year-old tube gate or putting in a new automated sliding gate across a ranch entry, the job has to handle heat, dust, and a lot of daily cycles without failing. We measure, order the right hardware, handle the concrete and power rough-in, and calibrate the opener to the gate’s actual weight and travel distance. See our main service hub for more on how we approach every job: Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every trip, and the manual latch or drop bar is no longer secure or has already failed.
What it costs in Pedley
Expect $2,500 – $6,000 in Pedley depending on gate weight, opener type, and whether we need to run new power conduit.
How we do it
We mount the operator on a reinforced pad or post, install the drive arm or chain, set travel limits, and wire in photo eyes and a keypad.
Driveway Gate Installation
Signs you need it
Your driveway entry is wide open or the existing gate sags, binds, or no longer matches the security you need for the property.
What it costs in Pedley
Budget $2,000 – $5,500 in Pedley for a typical residential driveway gate with opener, including posts and hardware.
How we do it
We set the posts in concrete at the right depth, hang the gate square, mount the opener, and dial in the auto-close delay and safety reverse.
What Gate Installation Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Gate panel plus posts and hardware | $1,200 – $4,000 |
| Opener and control package | $600 – $2,000 |
| Labor, concrete, and wiring | $800 – $1,500 |
How long does a gate installation take in Pedley?
Most residential Pedley gate installations finish in one to three days after the estimate, as long as the gate and opener are standard sizes and the posts don’t hit buried irrigation lines.
Custom gates or long sliding driveway spans can add a few days for fabrication and concrete cure time. Call (866) 371-3309 to schedule a site measure.
Do you handle the power run and safety edges?
Yes. We trench and run power conduit, install the photo eyes and reversing edges, and wire the keypad and intercom if you want one.
Every Pedley installation includes the safety reverse setup required for automated gates. Call (866) 371-3309 for a written price before work begins.
Brands We Service in Pedley
We work on your brand, period. That means LiftMaster, FAAC, BFT, and Linear operators are all in our regular rotation for Pedley service calls, and we stock common control boards, arms, and photo eyes for those systems locally. If you have a different brand, ask us anyway. Nine brands, one call. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pedley, CA
| Service | Typical range in Pedley |
|---|---|
| Automatic gate installation | $2,500 – $6,000 |
| Driveway gate installation | $2,000 – $5,500 |
| Electric gate installation | $1,800 – $4,500 |
| Sliding gate installation | $3,000 – $8,500 |
| Gate panel and posts (no opener) | $1,200 – $4,000 |
| Opener and control package | $600 – $2,000 |
| Labor, concrete, and wiring | $800 – $1,500 |
| Full gate installation project | $1,800 – $7,500 |
Pedley prices run higher than coastal Riverside County for two reasons: longer driveway spans need heavier gates and stronger openers, and the dust and heat mean we spec sealed hardware and reinforced mounts that cost a bit more up front but save you money over time.
Every job we quote in Pedley includes a written price agreed before work starts. You won’t see a bigger invoice than the number on the quote. Call (866) 371-3309 to get your number.
Neighborhoods We Serve in Pedley
Pedley’s 92509 ZIP covers a spread of older subdivisions, semi-rural parcels, and equestrian-style lots. We run service calls across the whole area, and we’re typically on site within a couple of hours for emergency gate failures. These are the areas we see most often:
- Riverside Avenue corridor
- Limonite Avenue area
- Santa Ana River bottom parcels
- Jurupa Valley border properties
- Equestrian and ranch lots east of Pedley Road
Service Area – Cities Near Pedley
Montclair Gate Repair handles gate work throughout the Jurupa Valley and western Riverside County. If you’re a few minutes east or south, we regularly serve Glen Avon, CA, Sunnyslope, CA, Rubidoux, CA, and Riverside, CA with the same brand-specific service approach. Call (866) 371-3309 and we’ll tell you straight whether we cover your street.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pedley
Yes. We cover the entire 92509 ZIP code, including the rural parcels along the Santa Ana River bottom and the older residential streets off Limonite and Pedley Road. If you’re in Pedley, we can get to you.
Call (866) 371-3309 if you’re unsure whether your property falls in our service area. Chances are it does.
Because Pedley is unincorporated, gate and fence work falls under Riverside County permitting rather than a city building department. Automated gates with safety edges and photo eyes generally follow county code for clearance and entrapment protection.
We’ll tell you what your specific project needs before we start, and we handle the code compliance so you don’t have to chase paperwork.
For emergency repair calls where a gate is stuck open and the property is exposed, we typically reach Pedley homes the same day, usually within a few hours depending on where you are in the 92509 ZIP.
Routine estimates and non-emergency repairs are scheduled within a normal service window. Call (866) 371-3309 and we’ll give you a straight answer on timing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pedley Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Alejandro Herrera"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Amanda Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Terrence Grant