Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fullerton, CA
Gate installation in Fullerton runs about $1,900 to $7,500 for a typical driveway gate, with electric automation adding $1,100 to $3,400 depending on the operator brand and access controls. Most Fullerton jobs involve replacing a sagging original wood gate or retrofitting old wrought iron onto new automated hardware. Montclair Gate Repair has served Fullerton since 2013, and we work on nine operator brands, from Mighty Mule residential openers to FAAC commercial systems. If your gate is stuck, sagging, or refusing to open, call (866) 371-3309 and we’ll diagnose it.
Why Fullerton Homes Are Different
Fullerton’s housing stock fronts two very different challenges. Near downtown, 1920s and 1930s Craftsman bungalows sit behind original wood or wrought iron gates that preservation-conscious owners want repaired, not replaced. In the flatlands east of Harbor Boulevard and up into the hills, you find 1950s and 1960s tract ranches with gates that worked hard through decades of Santa Ana winds and now sag on posts that have settled into shifting clay soil. Fullerton’s hot, dry summers warp wood and bake hinges; the occasional winter rain swells the soil and throws gates out of alignment. A gate that lived happily for twenty years can suddenly bind against the driveway after one wet season. We plan for that. We set posts deeper, choose hardware that tolerates movement, and when a historic home near the Fox Theatre needs a period-correct latch or strap hinge, we match it rather than slapping on something modern that preservation review would reject.
Styles & brands we work with
Our Main Fullerton Services
Two calls dominate our Fullerton work: mechanical gate repair and electric gate repair. Here is what each looks like here.
Gate Repair in Fullerton
Most mechanical gate failures in Fullerton come down to three things: rotted posts, sagging weld joints, or hinges that have seized from years of dry heat. On older Craftsman homes, the gate itself is often worth saving, but the post is done for. We pull the gate, pour a new footing, and rehang it with new hardware sized to the gate’s actual weight. On ranch properties east of Harbor, we see rusted wrought iron that has pulled away from masonry piers, and we reinforce before it drops. For the full scope of what we do, see Gate Repair in Fullerton.
Electric Gate Repair in Fullerton
When an automated gate stops mid-cycle or refuses every command, we trace the fault, not the symptom. Fullerton’s heat kills undersized control boards in direct sun, and its clay soil shifts loop detectors just enough to confuse the system into thinking a car is always present. We diagnose the board, the safety loops, the motor, and the wiring, then fix the actual cause. That is the difference between a gate that works for a month and one that works for years. For more, see Electric Gate Repair in Fullerton.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fullerton
A new gate in Fullerton is usually not a drop-in project. The gate has to match the house, hold up to heat and wind, and clear a driveway that may have settled unevenly over decades. Whether you want a manual replacement for a rotted original or a fully automated driveway system, we spec the gate, the posts, the operator, and the safety equipment as one job. That way the hardware is right for the weight and the board is right for the brand. Learn more about the full scope on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You are tired of getting out of the car to open the gate, or your old chain-drive operator has become too noisy and unreliable to trust.
What it costs in Fullerton
Automatic gate installation in Fullerton typically runs from $2,400 to $7,500, depending on gate size, operator brand, and the amount of electrical work needed at the driveway.
How we do it
We set the gate and posts, mount the operator, run a dedicated power circuit, install and test the safety edges and photo eyes, and then program remotes, keypads, and any smartphone access you want.
Sliding Gate Installation
Signs you need it
Your driveway slopes steeply toward the street, or you have limited swing clearance and need a gate that travels parallel to the fence line instead of arcing into the yard.
What it costs in Fullerton
Sliding gate installation in Fullerton generally costs between $2,800 and $8,000, with the price driven by gate weight, track type, and whether the operator is a residential chain drive or a commercial-duty unit.
How we do it
We pour a reinforced track bed or use a cantilever design, set the track and rollers, hang and balance the gate, mount the operator and rack, and then wire and test the full travel with safety stops in place.
What Gate Installation Costs in Fullerton
| Item | Typical range in Fullerton |
|---|---|
| Manual gate replacement (single driveway) | $1,900 – $3,800 |
| Automatic gate with operator | $2,400 – $7,500 |
| Sliding gate system | $2,800 – $8,000 |
Fullerton prices push toward the upper end when clay-soil movement requires deeper footings, when a historic district requires period-appropriate materials, or when the electrical run from the house to the gate is long. You get a written, itemized price before any work starts, and that number is the number on your invoice.
How long does a gate installation take in Fullerton?
Most Fullerton installations take one to three days. A manual gate on sound posts can finish in a day; an automated sliding gate with new footings, electrical, and programming typically takes two to three. We schedule after the quote is approved.
Do I need a permit to install a gate in Fullerton?
Most residential gate replacements do not require a city permit in Fullerton, but automated gates with a new electrical run usually do, and historic district properties may need design review. We handle the permit process when it applies.
Brands We Service in Fullerton
We work on LiftMaster, FAAC, Linear, and BFT operators in Fullerton, plus five other major brands. Because we service nine brands total, we stock common boards, remotes, and safety parts locally and can often fix a common failure in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fullerton, CA
| Service | Typical range in Fullerton |
|---|---|
| Hinge replacement | $180 – $400 |
| Post reinforcement or replacement | $400 – $1,200 |
| Gate alignment | $150 – $350 |
| Electric gate circuit board replacement | $300 – $800 |
| Safety loop repair | $250 – $700 |
| Electric motor replacement | $500 – $1,400 |
| Wire repair or replacement | $150 – $450 |
| Manual gate replacement | $1,900 – $3,800 |
| Automatic gate installation | $2,400 – $7,500 |
| Sliding gate installation | $2,800 – $8,000 |
Two things push Fullerton prices up: houses with settled posts that need new footings and long electrical runs from older panels to the driveway. Whatever the job, we quote the complete price before we start, and we do not bill above it.
Neighborhoods We Serve in Fullerton
We cover all of Fullerton, from the historic bungalow streets around downtown to the ranch neighborhoods east of Harbor Boulevard and the hillside subdivisions above the 57. We typically schedule most Fullerton jobs within a few days, and emergency gate failures get priority when a security gate is stuck open or blocking access.
- Downtown Fullerton and the Fox Theatre historic area
- East Fullerton ranch neighborhoods
- The hills north of Chapman Avenue
- Fullerton Creek and Orangethorpe corridor
- Raymond Hills and surrounding streets
Service Area – Cities Near Fullerton
Along with Fullerton, we cover neighboring North Orange County cities, including Anaheim, CA, La Habra, CA, Placentia, CA, and Brea, CA. If you are a property manager with gates across several cities, one call to (866) 371-3309 covers the whole area.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fullerton
For a security gate stuck open or a driveway gate blocking access, we treat it as a priority and often reach Fullerton properties the same day we hear from you. Standard repairs are generally scheduled within a few days. Call (866) 371-3309 and tell us what the gate is doing.
Yes. We regularly service HOA and multi-unit gate systems in Fullerton, including the operator, safety loops, keypad, and phone entry wiring. For community gates, we coordinate with the property manager on access and any HOA-specific requirements.
Yes, and we understand the constraints. In the downtown historic neighborhoods, we match original hardware where required and keep visible materials period-appropriate. We will tell you honestly when a gate can be saved and when a repair would not satisfy preservation review.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fullerton Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Terrence Grant"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Claudia Mendoza"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Daniel Anderson