Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Anaheim, CA | Montclair Gate Repair
Ghost Controls gate repair in Anaheim usually means a swing arm that faults, a board that corroded, or a post that leaned. We fix all three. We’re an independent Ghost Controls service provider, not manufacturer-affiliated or authorized, and our crews repair Ghost Controls swing and slide operators across Anaheim every week, including the 92801, 92804, 92805, 92807, and 92808 ZIP codes. Call (866) 371-3309 for a free estimate. The one thing that makes our Ghost Controls work different in Anaheim is that we know this city’s soil, not just this brand’s wiring.
Why Anaheim Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment daily. The control boards, the arm geometry, the accessory lineup, the way a TDS series behaves differently from a TSS under load. We know the brand because we repair it, not because we sell it. If you need Ghost Controls sales & service from a crew that has opened up hundreds of these units, that’s us. Noel Carrasco, our owner, grew up off Monte Vista Avenue in Montclair and spent two decades fixing gates across the Inland Valley before building Montclair Gate Repair. He learned the electrical and mechanical side at Chaffey College in Rancho Cucamonga, then learned what the classroom doesn’t teach: why a control board fails in summer heat, how a misaligned track eats a motor in six months, and what a property manager needs at 7 a.m. when a gate won’t open.
For Anaheim homeowners, that depth matters. A stuck gate isn’t just an inconvenience, it’s a security gap. We carry Ghost Controls-compatible OEM boards and motors where the original unit is still serviceable, and quality aftermarket arms, batteries, and accessories where OEM is discontinued or overpriced. We’ll tell you honestly when a Ghost Controls operator is worth repairing versus replacing. Sometimes the operator is fine and the gate itself is the problem.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Anaheim
- Corroded low-voltage terminals from alternating dry heat and marine-layer damp. Ghost Controls boards and battery harnesses fail in Anaheim because the Santa Ana winds bake the housing, then the coastal marine layer wets it. The low-voltage terminals corrode in those cycles and the operator throws false obstruction faults. We clean, re-terminate, or replace the board depending on how far the corrosion has spread.
- Gearbox and capacitor burnout on retrofit gates. A lot of Anaheim’s original 1950s and 60s wood gates were replaced with heavier vinyl or ornamental iron during the 1990s and 2000s remodel wave. Many of those heavier leaves went on the original hinged posts and hinges. The Ghost Controls arm then fights a dragging gate every single cycle, and the gearbox or capacitor pays for it. We fix the operator and the gate, not just the symptom.
- Limit drift and arm binding from leaning posts. In the older Anaheim flats, gate posts were often set directly into decomposed granite soil with no concrete footing. When a post leans, it racks the swing arm and pushes the Ghost Controls operator out of its programmed limits. Re-limiting the arm without fixing the post won’t last. We re-foot the post first.
- Keypad, remote, and intercom dropouts on marine-layer mornings. Anaheim’s damp mornings wick moisture into exterior junction boxes. When the keypad or intercom stops responding, the problem is usually a corroded connection in that box, not a failed accessory. We open it, clean it, and seal it properly.
- Battery backup failures after heat exposure. Ghost Controls battery backup units sit in direct sun on many Anaheim driveways. Heat shortens battery life substantially. We test the battery under load and replace it with a quality aftermarket unit when the OEM battery is done.
Ghost Controls Service in Anaheim: What Local Conditions Mean for Your Equipment
Here’s the thing about Anaheim that most generic Ghost Controls pages won’t tell you. In the older 92805 and 92801 flats, gate posts are often set straight into decomposed granite with no concrete footing, a condition the hillside tracts in 92807 and 92808 never see. So when a Ghost Controls operator keeps faulting in those neighborhoods, it’s usually fighting a leaning post rather than a bad board. The board is doing its job; it’s reading the drag as an obstruction. We were called to a 1950s tract house near Lincoln Avenue in 92801 where a Ghost Controls TDS single-swing operator had been throwing obstruction faults for weeks. The gate was a 2000s retrofit iron leaf on the original hinges, and the post had leaned out of the decomposed granite with no footing under it. We re-footed the post in concrete, re-hung the gate, and re-limited the arm. It’s cycled clean ever since. That’s the difference between a Ghost Controls tech who knows Anaheim soil and one who just swaps boards.
Ghost Controls Models & Products We Service in Anaheim
We service the full Ghost Controls residential lineup: the Heavy-Duty Single Swing (TDS) series, Standard-Duty Single Swing (TSS) series, Dual Swing (TD2) series, and the slide and tube-gate operator line. For parts, we use Ghost Controls-compatible OEM boards and motors where the original unit is still serviceable. Where OEM is discontinued or priced unreasonably, we use quality aftermarket arms, batteries, and accessories that hold up to Anaheim’s dry heat and damp cycles. We keep common Ghost Controls-compatible parts stocked for fast turnaround, which means fewer return trips for Anaheim homeowners.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Anaheim
Ghost Controls repair pricing in Anaheim depends on what failed. A replacement keypad or battery swap runs on the lower end. A control board replacement runs higher. A gearbox replacement on a TDS series unit that’s been fighting a heavy retrofit gate runs higher still. And if the post needs re-footing, that’s a separate line item. Here’s what we quote for common Ghost Controls work in Anaheim. Every price is agreed before any work starts.
| Service | Typical Range |
|---|---|
| Ghost Controls board replacement (parts & labor) | $180 – $340 |
| Gearbox or capacitor replacement (TDS/TSS series) | $220 – $390 |
| Battery backup replacement | $90 – $180 |
| Post re-footing with concrete | $275 – $470 |
| Gate re-hang with hinge replacement | $190 – $350 |
Call (866) 371-3309 for an exact quote. Estimates are free, and the price is locked before we start. No surprises when the invoice shows up.
Serving Anaheim, CA — Our Local Coverage Area
We’re based in the Anaheim area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Anaheim
Usually not. In the 92801 and 92805 flats, the first thing we check is the post. Decomposed granite soil, no footing, post leans, arm binds, board throws a false obstruction fault. The board may be fine. We check the post, the gate weight, and the arm geometry before we even open the control box. Call (866) 371-3309 and tell us the address; we’ll get it figured out.
We do it routinely. The repair usually includes re-hanging the gate, not just swapping the operator. A Ghost Controls TDS operator can handle a properly hung heavy gate. It cannot handle a gate that drags on undersized hinges. We fix the hinges and re-limit the arm so the operator isn’t fighting gravity every cycle.
We stock common Ghost Controls-compatible boards, motors, batteries, and accessories for fast Anaheim turnaround. Not every board variant is on the truck, but the common TDS and TSS series parts are. If we need to order something unusual, we’ll tell you the lead time before any work is scheduled.
It can. We’re independent, not authorized or affiliated with the manufacturer. If your Ghost Controls unit is still under manufacturer warranty, check the terms before any independent repair. What we can tell you honestly is whether the unit is worth fixing at all, warranty or not. Sometimes the operator is fine and the gate is the problem.
Moisture. Hillside homes in 92807 and 92808 get the marine layer overnight, and the exterior junction box where the keypad and receiver wire in is usually not sealed against it. The connections corrode, the signal gets intermittent, and the accessories drop out. We open the box, clean the terminals, and seal it properly. That usually fixes the dropout without replacing anything. Call (866) 371-3309 if you want us to check it.
Service Areas Near Anaheim
We serve all of Anaheim service area and the surrounding communities. We also provide Ghost Controls service in Colton for Inland Empire homeowners and Ghost Controls service in Aliso Viejo for south county. Our crews cover Orange, North Tustin, Buena Park, and Grand Terrace as well.
Book Your Ghost Controls Service in Anaheim Today
Call (866) 371-3309 for a free estimate on Ghost Controls repair in Anaheim. We’ll ask what your operator is doing, or not doing, and we’ll tell you what it needs. Tell me what it’s doing – or not doing – and I’ll tell you exactly what it needs.
Written by Noel Carrasco, Owner at Montclair Gate Repair, serving Anaheim and the Inland Valley since 2004.