Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Campo, CA
Gate installation in Campo usually means one of two jobs: hanging a heavy custom-welded ranch gate on a gravel drive off CA-94, or putting in an automated opener on a gate that has been swung by hand for twenty years. We plan each one around wind, dust, and freeze cycles, because those are the forces that actually tear gates apart out here. If you need a gate quoted, repaired, or automated in Campo, call us at (866) 371-3309.
Why Campo Homes Are Different
Campo sits at roughly 2,600 feet in high-desert backcountry, and the gates here take weather that suburban gates never see. Summer heat dries and cracks wooden gates. Winter overnight freezes heave gate posts and bind latch hardware. The Santa Ana and desert wind events that sweep through the mountain passes are the real killer: a sustained 40 mph gust against a 12-foot ranch gate exerts hundreds of pounds of leverage on hinges, welds, and the post itself. We reset more sagging gates in Campo after wind events than for any other single reason.
Most Campo properties are detached single-family homes on large lots, rural ranches, or manufactured homes scattered along the CA-94 corridor. Gates tend to be custom-welded steel or wood, mounted on pipe-and-wire fencing rather than standard residential driveways. Many were built on site, sometimes decades ago, and we are often the first company to touch them since. Because most of unincorporated Campo has no municipal utility grid, a gate is frequently the only physical boundary a property has. When it will not close, livestock gets out, vehicles get stranded, or a border-country property sits open overnight. That changes what “gate repair” means here: it is not about curb appeal, it is about function and security.
Styles & brands we work with
Our Main Campo Services
Two services account for nearly every call we make in Campo: gate repair for the mechanical failures out here, and electric gate repair for automated systems that stop responding.
Gate Repair in Campo
A Campo ranch gate fails differently than a suburban one. Wind fatigue cracks welds, freezes heave posts, dust packs into latch mechanisms until they bind, and years of sun warp wooden gates off their original alignment. We repair or replace hinges, weld cracked frames, reset leaning posts, and rebuild latches so the gate actually closes the first time. For the full scope of mechanical gate repair in Campo, see our Gate Repair in Campo page.
Electric Gate Repair in Campo
When an automated gate in Campo stops responding, the cause is usually one of four things: a failed control board, a tripped or broken safety loop, a worn motor, or chewed or sun-damaged wiring. We trace the fault across the system and fix what actually failed, not just the symptom. For a detailed breakdown of how we diagnose and repair automated systems in Campo, see our Electric Gate Repair in Campo page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Campo
A new gate in Campo has to be planned for the wind and weighted for the use it will actually get, whether that is a 14-foot ranch entrance opened by hand or an automated driveway gate on an acreage parcel. Most Campo installations are custom-fit to an existing opening, because the posts, pipe fencing, and terrain are rarely standard. We handle gate installation from a bent arm to a full system, and we quote the full price before any work starts. For an overview of our Gate Installation service, see the linked page.
Automatic Gate Installation
Signs you need it
You are getting in and out of your vehicle to open a heavy ranch gate multiple times a day, and the gate is heavy enough that an opener will pay for itself in saved time and wear.
What it costs in Campo
Automatic gate installation in Campo typically runs $3,500 – $9,000, depending on the operator, gate weight, and whether power has to be run to the gate location.
How we do it
We measure the gate and opening, check post stability, match the operator to the gate’s weight and swing direction, install the motor and control board, wire power and safety loops, and calibrate the full system.
Driveway Gate Installation
Signs you need it
You have a wide driveway opening that needs a gate that will close tight against wind and dust, and the old gate is sagging or missing entirely.
What it costs in Campo
Driveway gate installation in Campo typically runs $3,500 – $9,000, with welded steel ranch gates on the higher end of the range.
How we do it
We set and brace the posts, build or order the gate to the exact opening width, hang it with hinges sized for the weight, and install the latch or automation you specify.
What Gate Installation Costs in Campo
| Item | Typical range in Campo |
|---|---|
| Gate installation (manual) | $3,500 – $9,000 |
| Automatic gate installation | $3,500 – $9,000 |
| Custom ranch gate (welded steel) | $5,000 – $12,000 |
How long does a gate installation take in Campo?
Most gate installations in Campo are completed in one to three days. Custom-welded gates add lead time for fabrication, usually one to two weeks before installation day. We confirm the timeline before work begins.
Do you handle the power run for an automatic gate?
Yes. Many Campo properties have no existing power at the gate line. We run conduit and wiring from the nearest panel to the operator, install the control board and safety loops, and verify the whole system before we leave. Call (866) 371-3309 for a site-specific quote.
Brands We Service in Campo
We work on your brand. Our technicians service FAAC, BFT, Linear, and Viking operators in Campo, along with five other major manufacturers across residential and commercial applications. Because we carry the common boards, loops, and remotes for these systems, many repairs are completed on the first visit rather than after a parts order. For the full list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Campo, CA
| Service | Typical range in Campo |
|---|---|
| Gate repair (mechanical) | $180 – $1,800 |
| Electric gate repair | $280 – $1,200 |
| Gate installation (manual) | $3,500 – $9,000 |
| Automatic gate installation | $3,500 – $9,000 |
| Custom-welded ranch gate | $5,000 – $12,000 |
| Gate opener motor replacement | $650 – $1,900 |
| Safety loop replacement | $350 – $900 |
| Hinge or weld repair | $180 – $600 |
Prices in Campo run higher than coastal San Diego for two reasons: the drive out CA-94 adds travel time to every job, and custom-welded or owner-built gates usually require fitting rather than a straight part swap. Every job is quoted and agreed before we start, so the number on the invoice is the number on the estimate.
Neighborhoods We Serve in Campo
We serve all of Campo and the surrounding backcountry within the 91906 ZIP code, including:
- Campo town center along CA-94
- Lake Morena and the Morena Valley
- Campo East and the Old Highway 80 corridor
- Boulevard and the Manzanita area
- Ranch properties off Buckman Springs Road
We schedule Campo jobs in a single dispatch window most weeks, so response is typically one to three business days for non-emergency work, with emergency repair available for a gate that has stranded vehicles or left livestock uncontained.
Service Area – Cities Near Campo
Montclair Gate Repair serves Campo and the surrounding mountain and backcountry communities. We regularly work in Pine Valley, CA, Descanso, CA, Alpine, CA, and Harbison Canyon, CA. If your gate is in the 91906 area or anywhere along the CA-94 corridor, we can get to it.
Serving Campo, CA — Our Local Coverage Area
We’re based in the Campo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Campo
Yes. We dispatch to Campo regularly and do not require a minimum job size. Most repairs are quoted over the phone with photos, so you know the price range before we drive out. Call (866) 371-3309 and we will tell you if the job is worth scheduling a visit.
For most unincorporated Campo properties, a replacement gate on existing posts does not require a permit. New automated systems or new electrical runs may need county review through San Diego County. We can tell you what applies to your specific parcel and gate location when we quote the job.
Standard gate installations in Campo are usually scheduled one to two weeks out. Custom-welded gates add fabrication time, which we confirm when you approve the design. Emergency repair for a gate that will not close is handled on a separate, faster schedule. Call (866) 371-3309 for current availability.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Campo Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Riya Shah"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Neil Hayes"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Walsh