Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana usually means one of two jobs: replacing a rusted 1960s side-yard gate in the older 92335 core, or putting in a new automated driveway gate on a newer east-side lot near the 92336/92337 subdivisions. The work here splits between straightforward residential retrofits and heavier commercial installations along the I-10 warehouse corridor. Montclair Gate Repair has served Fontana since 2013, and we quote every job the same way: a fixed number agreed on before any work starts. Call (866) 371-3309 for a free estimate.
Why Fontana Homes Are Different
Fontana’s original housing stock came up fast in the 1950s through ’70s, when the steel mill was the town’s engine. Those single-story tract homes in the central neighborhoods still have the original ornamental iron and chain-link side gates, and after five or six decades of San Bernardino County sun, most are sagging at the hinge post or rusted through at the bottom rail. The dry inland air and Santa Ana winds strip paint and loosen hardware faster than coastal climates do, and when the occasional winter rain does arrive, it finds every crack and accelerates corrosion on unprotected metal. Newer subdivisions on the east side have their own pattern: builder-installed automatic gates with control boards and operators that fail from heat exposure, because the electronics sit inside a metal box that bakes in triple-digit summer afternoons. Commercial and warehouse properties along the I-10 corridor add another layer: heavy sliding gates that cycle dozens of times a day and wear out rollers, tracks, and motors on a predictable schedule. When we quote a gate installation in Fontana, we’re looking at the age of the property and what the gate is up against, not just the measurements.
Styles & brands we work with
Our Main Fontana Services
Most Fontana calls we answer fall into two categories: a gate that’s broken and needs diagnosis, and a gate that needs to exist and doesn’t yet. Both start the same way: a phone call and a straight answer.
Gate Repair in Fontana
A sagging gate on an older Fontana home usually means the hinge post has pulled loose from decades of wind load, or the hinge barrels have worn oval and the leaf dropped. On commercial properties it’s more often a roller or track that gave out under heavy use. We straighten what’s worth straightening, replace what isn’t, and weld or re-hang so the gate clears the ground and latches properly again. See Gate Repair in Fontana for the full breakdown of what we fix and what it costs.
Electric Gate Repair in Fontana
When an automatic gate in Fontana stops responding, the fault is usually in one of four places: the control board, a safety loop, the motor, or the wiring between them. Our technicians trace the signal path and find the actual cause rather than swapping parts on a guess. Heat-related board failures are common here, and so are loop detectors knocked out by the expansion and contraction of asphalt in the summer. Read Electric Gate Repair in Fontana for a detailed look at how we diagnose and fix automated systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fontana
Gate installation in Fontana means matching the new gate to the property it’s going on, and that’s where a lot of online order-and-install jobs fall apart. A gate spec’d for a flat coastal lot will bind on a Fontana driveway that pitches toward the street, and an unpainted steel frame will start rusting within two seasons of Santa Ana wind and dry summer heat. We measure the opening, check the posts and the grade, and build or order the gate to fit what’s actually there. Whether it’s a fresh automatic driveway gate on a new lot or a replacement for a rusted 1960s side gate, the same technician handles it start to finish, and the price is fixed before we start. That’s the full scope of what we do on Gate Installation, and here’s how it breaks down in Fontana specifically.
Automatic Gate Installation
Signs you need it
The existing gate is manual and you’re done hauling it open in the heat, or the old operator has failed and the gate is permanently stuck open or closed.
What it costs in Fontana
Automatic gate installation in Fontana typically runs $1,900 to $6,500 depending on gate size, operator brand, and whether new electrical service has to be pulled to the post.
How we do it
We set or reinforce the posts, hang the gate, install the operator (we work on LiftMaster, Mighty Mule, DoorKing, and others), run the power, wire the safety edges and loops, and test the full cycle under load.
Driveway Gate Installation
Signs you need it
The driveway opening is wide, the property sits on a busy Fontana street, or the old gate is too rusted and bent to justify another repair.
What it costs in Fontana
Driveway gate installation in Fontana typically ranges $2,200 to $7,000, with the lower end covering a manual ornamental gate and the upper end covering an automated steel gate with safety loops.
How we do it
We assess the driveway grade and post condition, fabricate or order the gate to spec, install heavy-duty hinges and posts set in concrete, hang the leaf, and calibrate the operator for the specific weight and travel of the gate.
Sliding Gate Installation
Signs you need it
The property has a wide opening or a steep driveway where a swing gate would scrape or bind, which is common on Fontana’s commercial lots and some uphill residential driveways.
What it costs in Fontana
Sliding gate installation in Fontana typically runs $2,800 to $8,500, with track, roller, and motor configuration driving most of the cost difference.
How we do it
We lay the track or set the cantilever system, mount the gate on rollers or trucks, install the operator and rack, wire the safety sensors and loop detectors, and set the open and close limits.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Automatic gate installation | $1,900 – $6,500 |
| Driveway gate installation | $2,200 – $7,000 |
| Sliding gate installation | $2,800 – $8,500 |
How long does gate installation take in Fontana?
Most residential gate installations in Fontana are finished in one to two days once the gate and operator are on-site. Custom-fabricated gates add lead time because of the fabrication queue. We’ll give you a schedule before any work begins.
Do I need a permit for a gate in Fontana?
Most residential gate replacements on existing posts don’t need a permit, but new automated installations with electrical work sometimes do, depending on the location and the City of Fontana’s current requirements. We’ll check before we quote, so there are no surprises later. Call (866) 371-3309 and we’ll verify for your specific address.
Brands We Service in Fontana
We’re certified across nine gate-operator brands, and for Fontana we keep parts on the truck for the ones we see most: DoorKing, Elite, Mighty Mule, and LiftMaster. That means a board swap or a sensor replacement usually happens on the first visit rather than waiting on a parts order. See our brands for the full list and what each one’s common failure points are in this climate.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Automatic gate installation | $1,900 – $6,500 |
| Driveway gate installation | $2,200 – $7,000 |
| Sliding gate installation | $2,800 – $8,500 |
| Gate repair | $160 – $850 |
| Electric gate repair | $180 – $1,200 |
| Gate operator replacement | $350 – $1,400 |
| Control board replacement | $180 – $650 |
| Safety loop installation or repair | $225 – $600 |
| Chain replacement | $150 – $400 |
| Hinge replacement | $90 – $350 |
In Fontana, the biggest price movers are gate size and the condition of the posts. A 14-foot steel drive gate with rotting wooden posts costs more than a 4-foot side gate with good steel posts, and older central Fontana homes are more likely to need post work than newer east-side builds. Whatever the number, it’s the number you approve before we order anything or turn a wrench.
Neighborhoods We Serve in Fontana
We run calls across all four Fontana ZIP codes: 92334, 92335, 92336, and 92337. That covers the older central neighborhoods, the newer subdivisions on the east side, and the commercial and warehouse districts along the I-10 and Valley Boulevard corridors.
- Downtown Fontana (92335) – older tract homes, sagging ornamental and chain-link gates
- Southridge (92336) – newer builds with builder-installed automatic systems
- Northgate (92336) – mixed residential, lots of side-yard gates
- Sierra Lakes (92336) – larger lots, heavier driveway gates
- West End / I-10 industrial corridor (92334, 92337) – commercial sliding gates and warehouse access
We typically schedule most repairs within a couple of business days for non-emergency calls, and we carry the common boards and hardware for Fontana’s most frequent failures on the truck.
Service Area – Cities Near Fontana
Montclair Gate Repair covers Fontana and the surrounding Inland Empire communities, including Bloomington, CA just to the west, Rialto, CA to the northwest, Glen Avon, CA to the southwest, and Pedley, CA to the south. If your gate is down and you’re in one of those areas, the same technicians and the same upfront pricing apply.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
For a gate stuck open or closed, we typically schedule service within a couple of business days in Fontana, and we run calls across all four ZIP codes: 92334, 92335, 92336, and 92337. Call (866) 371-3309 and we’ll give you the next available window for your neighborhood.
Yes. We work on individual homeowner gates and on HOA-managed community gates, and we’re used to the scheduling and access requirements that come with both. For HOA work we’ll coordinate with the property manager and provide a written quote before anything is approved.
We can give you a ballpark over the phone, but an exact quote needs eyes on the site: post condition, driveway grade, gate size, and power access all change the number in Fontana. Estimates are free, and the final price is set before any work starts.
If your gate is down, stuck, or just past saving in Fontana, call Montclair Gate Repair at (866) 371-3309. We’ll diagnose it straight, quote it firm, and fix it right: nine brands, one call, and no invoice surprises.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Daniel Anderson"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Wade Miller"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Riya Shah