Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pomona
A gate that won’t open or won’t close in Pomona creates two problems at once: you can’t get your car out, and your property is exposed. Most gate repairs we handle across Pomona are fixed the same day, and we stock common parts for LiftMaster, DoorKing, Elite, and Mighty Mule operators on our trucks. If you’re in 91766, 91767, 91769, or 91797, call us at (866) 371-3309 for a free estimate before any work begins.
We know Pomona’s older blocks and newer tracts because we work them weekly. From citrus-era Craftsman bungalows near downtown to postwar homes on the east side toward 91768, the gate problems differ by era and by street. That matters when you need a fix that holds up to Santa Ana winds and inland valley heat instead of failing again in six months.
Why Montclair Gate Repair Is Pomona’s Preferred Gate Repair Company
We work on your brand. That’s the first thing Pomona homeowners and property managers hear from us, because it’s the thing that matters when an automatic gate fails at 7 a.m. and you need to leave for work. Our technicians are certified across nine gate-operator brands, including LiftMaster, DoorKing, Elite, and Mighty Mule, so we don’t stand in your driveway reading an unfamiliar manual. We diagnose the actual fault, board, loop, motor, or wiring, and fix that.
Pomona customers call us for two reasons. The first is the mixed housing stock here. We’ve re-anchored original masonry piers on Lincoln Park Craftsman homes and we’ve rebuilt bent steel gates on tract lots in the east neighborhoods. The second is that we treat electric and automated gate repair as our core skill, not an add-on. From a bent arm to a full new installation, the same specialist handles the job start to finish.
Styles & brands we work with
Driveway Gate Repair in Pomona
Driveway Gate Repair in Pomona usually means one of three situations: a swing gate that has sagged on aging posts, a sliding gate that has jumped its track, or an automated opener that has stopped responding to remotes and keypads. In Pomona specifically, we see more sagging swing gates on prewar homes than in neighboring newer cities like La Verne or Los Serranos, because the original posts and piers are 70 to 100 years old. A typical driveway gate repair in Pomona runs $180 – $400 for hinge, latch, and track work, depending on whether the post itself needs re-anchoring.
Hinge and Post Repair
On older Pomona properties, a sagging gate is frequently not a hinge problem at all. We check the bottom of the post or pier first. Original citrus-era masonry piers near Lincoln Park and downtown often crumble at the base, which leans the post and drags the gate. Replacing hinges without fixing the pier is wasted money. We re-anchor the pier, then set stainless hinges matched to the original gate style.
Gate Realignment
Postwar homes in 91768 and parts of 91766 typically have welded steel gates hung on round posts set in concrete. These gates hold up better to Pomona heat, but Santa Ana winds flex the post sleeves and throw the gate out of level. Realignment on these jobs is usually a two-hour visit with new post caps or reinforcement, and it runs $150 – $300.
Gate Welding in Pomona
Gate Welding in Pomona covers broken pickets on steel driveway gates, snapped hinge mounts, cracked frame corners on sliding gates, and rusted-through bottom rails. On the east side, tract-era steel gates are common and thin-gauge, so rust at the bottom rail is the usual failure after 20 or 30 inland summers. On older properties near downtown, we weld repair original wrought iron when the metal is thick enough to be saved, and we fabricate replacement sections only when it isn’t. Gate welding work in Pomona typically runs $200 – $600 depending on how much cutting out and rebuilding the frame requires.
Weld and Rust Repair
Pomona’s inland heat bakes paint off steel gates and accelerates rust, especially on south-facing and west-facing elevations. We cut out the rusted section, weld in matching gauge steel, grind the seams, and prime and paint to match. A single bottom rail or post base repair is usually $180 – $300. For heavily rusted gates, we’ll tell you honestly whether repair makes sense or whether a new frame costs less.
Broken Gate Arm and Bracket Welding
Automatic gates in Pomona put constant stress on the arm bracket and mounting plate, especially gates that open and close daily for multiple units on apartment properties. When the weld fails at the bracket, the opener arm pulls free and the gate dead-stops. We weld and reinforce the bracket, then recalibrate the operator limits so the opener isn’t over-traveling. That runs $250 – $450 on most Pomona residential gates.
Trusted Brands We Service in Pomona
We stock parts for the operator brands Pomona homeowners own. LiftMaster is the most common residential opener in the 91766 and 91767 areas, often on garage and side-yard gates on postwar lots. DoorKing and Elite show up on commercial and multi-family gates along the major corridors, and Mighty Mule units are popular on older Pomona properties where owners retrofitted an automatic opener onto an existing swing gate. We keep control boards, remotes, safety loops, and motor components in our vehicles, so most brand-specific repairs happen on the first visit. Nine brands. One call.
Common Gate Repair Problems We See in Pomona Homes
- Failing citrus-era masonry piers: On older blocks near Lincoln Park and downtown, gate posts were set directly against original masonry or property walls. When the pier face cracks or shifts, the gate sags and scrapes. We re-anchor the pier rather than pouring new footings, which preserves the original look.
- Santa Ana wind damage to wooden gates: Pomona sits in the path of the Santa Anas, and those winds warp wooden picket and driveway gates, loosen hinge screws, and dry out wooden posts. A gate that starts rubbing the ground after a wind event usually means the post has shifted, not the hinges.
- Alley-facing gates from the citrus and rail era: Many Pomona lots still have rear gates onto alleys, inherited from when citrus crates and rail freight moved through the city. Owners want these gates functional and code-compliant, not gone. We repair the frame and hardware while keeping the original gate where possible.
- Operator board and safety loop failures: Inland heat shortens board life on LiftMaster, DoorKing, and Elite operators, particularly on west-facing installations. We trace the fault, board, loop, motor, or wiring, and replace only what’s failed.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Pomona, CA
Here are the ranges we quote Pomona customers. Hinge replacement and realignment: $150 – $300. Post re-anchoring on original masonry piers: $350 – $700, depending on access and pier condition. Gate welding: $200 – $600. Operator board replacement: $250 – $500 plus parts. Full driveway gate replacement starts around $1,500 for a simple steel swing gate and rises from there based on automation and design. We quote the full price before any work begins, and you approve it in writing. Call (866) 371-3309 for an exact quote on your Pomona gate, estimates are free.
We Also Serve Cities Near Pomona
Our Gate Repair team covers Pomona and the surrounding eastern San Gabriel Valley communities. We work regularly in La Verne, Claremont, Montclair, and Los Serranos, and we’re familiar with the gate styles and housing stock in each. If you’re nearby and need a gate specialist, call us at (866) 371-3309. For more about our work specifically in this area, see Gate Repair in Pomona.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pomona
On homes that old, it’s almost always the original masonry pier shifting behind the hinge post, not the hinges themselves. We recently repaired a sagging driveway swing gate on a 1920s Craftsman near Lincoln Park. The gate had been re-hung twice by others, but our tech found the original pier had shifted and leaned the post. We re-anchored the pier and replaced the corroded hinges with stainless steel, and the gate has swung level since. Call (866) 371-3309 and we’ll inspect the pier before anyone sells you new hardware.
Pomona’s inland heat, dry air, and Santa Ana winds fail gates differently than coastal Los Angeles. Wood posts crack and dry from the heat, Santa Anas warp gate frames and loosen hinge screws, and metal gates rust faster on south-facing elevations because paint breaks down quicker in the valley sun. We specify stainless fixings and heavier gauge steel for Pomona work because standard galvanized hardware won’t last the same number of years here.
Yes. We handle original alley-facing gates in Pomona’s older zones, including wrought iron and wood gates built during the citrus and rail era. These gates often need frame repair and re-hanging when the post has rotted or the masonry at the alley corner has failed. We repair them to function and to meet current code without ripping out the original character. Call (866) 371-3309 to have us look at your alley gate.
The first thing we check on an automatic gate in Pomona is the operator board and its error diagnostics, then the safety loops and limit sensors. Inland heat stresses control boards, and many Pomona automatic gates sit fully exposed to the sun on west-facing elevations, so board failure is common. We trace the fault, board, loop, motor, or wiring, and replace the part that actually failed, nothing more.
Yes, we weld and repair steel gates on postwar tract homes in 91768 and across Pomona’s east side. These gates are usually lighter gauge steel that rusts out at the bottom rail or cracks at the hinge mount. We cut out the bad section, weld in replacement steel, and prime and paint to match. Most tract-home gate welding jobs run $250 – $500. Call (866) 371-3309 for a free estimate.
Contact Us for Gate Repair in Pomona
If your gate is stuck open, stuck shut, sagging, or failing to respond to its remote, call Montclair Gate Repair at (866) 371-3309. We serve Pomona’s older neighborhoods, east side tracts, and commercial properties. We’ll give you a free estimate, and you’ll know the full price before any work starts.
Written by Noel Carrasco, Owner at Montclair Gate Repair, serving Pomona and the San Gabriel Valley.