Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateElectric Gate Repair in San Bernardino: What It Costs and Who to Call
Electric gate repair in San Bernardino typically runs $225 – $475 for most service calls, depending on whether the fault is mechanical or in the control board. A straight gate motor replacement in San Bernardino runs $450 – $900, while a full operator retrofit on a legacy system can run $1,100 – $2,400 with parts and labor. Most repairs in San Bernardino are completed in one visit, and we’ll quote the price before any work begins. Call (866) 371-3309 for same-day scheduling across San Bernardino.
San Bernardino’s gate repair market has a shape all its own. The city is full of post-war tract homes and older rentals, many with alley-accessed side yards and long driveways secured by iron or chain-link gates that went in during the Eisenhower and Nixon administrations. Those gates settle, rust, and drift out of alignment in ways newer subdivisions never see. We know which neighborhoods need post re-setting before any operator work, and we carry parts for the brands those older systems were built around.
Fast, Reliable Electric Gate Repair Across San Bernardino
We cover San Bernardino end to end, from the older 92404 and 92405 grid up through 92401, 92402, and 92403. When a gate stops opening or a keypad goes dead, you’re not calling a general handyman. You’re calling a company that’s repaired electric gate operators in San Bernardino long enough to know that a LiftMaster actuator on a 1970s iron gate off Highland Avenue fails differently than a FAAC hydraulic operator on a commercial driveway off Waterman. That matters when the job’s a one-visit fix, not a two-week parts chase.
Noel Carrasco leads our service team, and he’s the one who set the standard here: diagnose the actual fault, quote the actual repair, and never sell a replacement when the fix is honest. You call (866) 371-3309, you get someone who’s worked on your brand.
Styles & brands we work with
Why Montclair Gate Repair Is San Bernardino’s Preferred Electric Gate Repair Company
San Bernardino homeowners and property managers keep our number because we show up already knowing what’s on the gate. We’re not spending your paid service hour looking up a wiring diagram for the first time. Our Electric Gate Repair team services LiftMaster, FAAC, BFT, Linear, and Viking operators across residential and commercial properties, which means the parts van that pulls up to a San Bernardino rental is stocked for the board, the loop detector, and the hinge repair, not just the motor.
We don’t post fake response-time promises. What we can say is this: San Bernardino is close enough to our base that same-day service is realistic in most cases, and we’ll tell you on the phone what the window actually looks like. We’ve worked driveways off Mill Street, commercial lots along Hospitality Lane, and gated apartment entries across the 92404 grid. The local pattern we see most often: the operator isn’t broken. The gate is.
That’s the difference between a parts swapper and a gate technician. You want the technician.
Gate Access Control in San Bernardino
Gate access control in San Bernardino means the full system that decides who gets through: the keypad, the telephone entry unit, the loop detector in the asphalt, the safety photoelectric eyes, and the control board that ties them together. In San Bernardino’s older rental neighborhoods around 92404 and 92405, many of these systems are original to the property, and the control board may predate modern safety requirements. That’s the core work we handle: retrofitting keypads and photo-eyes onto legacy operators, or replacing boards that can no longer accept them.
A new keypad or card reader install on an existing gate in San Bernardino typically runs $350 – $750. Adding a telephone entry system for a multi-unit property runs $900 – $1,800 depending on the panel and wiring run. We’ll quote the full price before any hardware is ordered.
Retrofit vs. Replace on Legacy Systems
Many San Bernardino gates built before about 2010 have control boards that won’t accept modern UL 325 compliant safety photocells. If your operator still runs but fails entrapment protection testing, we can often retrofit a current-edge sensor or a newer receiver board. When the board’s architecture won’t support it, we’ll tell you the replacement cost up front, not after we’ve opened the panel.
Access for Rentals and Multi-Unit Properties
Landlords and property managers across San Bernardino call us for keypad resets, tenant code changes, and full access control upgrades on gated parking areas. We handle DoorKing and Linear telephone entry systems, which are standard on older apartment entries along the 92410 corridor and commercial lots near the 215.
Commercial Gate Operator in San Bernardino
A commercial gate operator in San Bernardino has to survive heat, wind, and daily traffic from delivery trucks and tenant vehicles. The operators we service here run the range: FAAC hydraulic operators on industrial driveways, BFT electromechanical arms on office parking entries, and older DoorKing slide gates on apartment complexes that haven’t been upgraded in fifteen years. The strain these systems take is constant, especially when Santa Ana winds push gate panels and the motor fights the rack.
Commercial gate operator repair in San Bernardino typically runs $500 – $1,400 for motor and limit issues, and $1,500 – $3,200 for a full operator replacement on a heavy slide gate. We’ll assess on site and give you a written number before any work starts.
Slide Gate and Arm Operator Work
Slide gates on commercial lots see the most abuse, because a misaligned track makes the motor work against the gate’s full weight. We check the wheels, the track, and the rack engagement before assuming the operator is at fault. Sometimes the operator’s fine and the gate’s out of square. Sometimes it’s the reverse.
Loop Detectors and Safety Edges
Exit loops buried in asphalt crack or get cut during repaving, and a failed loop means the gate won’t auto-exit or won’t hold open. We install and tune loop detectors and safety edges on San Bernardino commercial entries regularly, and we test entrapment protection to current UL 325 standards once the job’s done.
Trusted Brands We Service in San Bernardino
We work on your brand. That’s the whole point of calling a specialist. In San Bernardino, the operators we see most are LiftMaster residential units, FAAC and BFT commercial arms, Linear openers on older rental gates, and the occasional Viking on heavier slide gates. We stock common boards, remotes, keypads, and safety eyes for these brands in our van, which means fewer return trips and shorter turnaround when you need your driveway working. If you’re in San Bernardino and your operator is a brand the last contractor wouldn’t touch, call us. Nine brands, one call: (866) 371-3309.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in San Bernardino Homes
- Settled hinge posts on alley-accessed side gates. In the 92404 and 92405 grid, the post footing moves with the dry, shifting soil, and the gate panel drifts until the operator’s limits are fighting the geometry. We re-plumb the post, repair the hinge, and re-learn the limits.
- Rust-welded hinges on 1950s-70s wrought-iron gates. The Inland Empire heat accelerates rust at every pivot point. Hinges seize, the panel flexes, and the swing gate stalls mid-travel or trips entrapment protection.
- Obsolete control boards that won’t accept modern safety inputs. Operators installed in the 1980s and 1990s often can’t wire to new photo-eyes or keypads. We’ll tell you honestly when a board replacement keeps your existing operator alive, and when replacement is the cheaper math.
- Chain-link gates sagging on long side driveways. Many San Bernardino rentals have original chain-link gates stretched on post-and-pipe frames. The frame bends, the gate binds, and the operator motor burns out trying to move it. We fix the frame, the track, and the operator in one visit.
Pricing for Electric Gate Repair in San Bernardino, CA
Here are the numbers San Bernardino homeowners and landlords actually ask us for. A service call to diagnose an electric gate issue in San Bernardino runs $89 – $129, and that’s credited toward the repair if you proceed. Hinge and post re-alignment typically runs $180 – $350. Keypad or remote replacement runs $150 – $300. A new gate motor runs $450 – $900 installed. A full control board replacement runs $350 – $700. Any job over $300 is quoted and agreed before work starts, in writing, so the invoice never surprises you. We offer free estimates for full operator replacements and new installs.
We Also Serve Cities Near San Bernardino
Our San Bernardino service area extends into Muscoy, Highland, Loma Linda, and Rialto. Same scheduling, same multi-brand parts stock. If your property’s on the edge of the 92404 ZIP or right across the city line, call (866) 371-3309 and we’ll get it handled.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Bernardino
Most pre-2000 operators can be retrofitted with safety photocells or a contact edge, but it depends on the control board. If the board has built-in entrapment protection terminals, we can wire the eyes directly. If it doesn’t, we’ll quote you the retrofit module or recommend a board replacement. Call (866) 371-3309 and we’ll identify what’s on your gate and tell you the options before we schedule.
In San Bernardino, it’s the gate as often as the operator, especially on older alley-accessed properties where the hinge post has moved in the dry soil. We check the post plumb, hinge wear, and panel alignment first. If the gate’s out of square, no new operator will fix it. We’ll show you what we found and quote the mechanical repair separately from any operator work.
The honest math: if the board is $400 – $700 and the motor, gearbox, and hinges are still sound, repair makes sense. If the motor’s also on its way out and the operator’s over 15 years old, replacement at $1,100 – $2,400 is usually the better long-term call. We’ll walk you through both numbers for your specific brand and model, and the quote’s free.
Yes. Commercial gate operators are a core part of our work across San Bernardino, including apartment entries, industrial driveways, and business parking lots. We service FAAC, BFT, DoorKing, and Linear commercial systems, and we handle loop detectors, safety edges, access control wiring, and full operator replacements. Call (866) 371-3309 for a site assessment and written price.
Yes, and it’s one of the most common calls we run in San Bernardino. We pull the gate, dig out and re-set the post footing, re-plumb it, and re-hang the gate with new hinges if they’re rusted. We do this regularly in the 92404 and 92405 grids where the native soil moves with heat and drought. Once the post is solid, we re-learn the operator limits and test the safety circuit. This keeps the existing operator in service instead of replacing a motor that was never the real problem.
Call Montclair Gate Repair for Electric Gate Repair in San Bernardino, CA
Your gate is stuck, sagging, or dead, and you need a technician who’s worked on your brand and knows San Bernardino’s older gates. Call (866) 371-3309 for a free estimate, or tell us what the gate’s doing and we’ll give you a straight answer over the phone. Same-day service when we can, clear pricing always, and nine brands covered by one team.
Written by Noel Carrasco, Owner at Montclair Gate Repair, serving San Bernardino since our first call in the 92404 grid.