Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Bernardino, CA
Gate installation in San Bernardino means working with a housing stock most contractors never think about: post-war single-story tract homes with long, alley-accessed driveways, welded chain-link frames, and wrought iron that’s been baking in Inland Empire sun since the Eisenhower administration. We install new gates that actually fit this city, not catalog units designed for stucco-box suburbs elsewhere. And when an existing gate fails, we fix it at the post, the hinge, or the control board. If your gate is stuck, sagging, or won’t open, call Montclair Gate Repair at (866) 371-3309. Nine brands. One call.
Why San Bernardino Homes Are Different
Most of San Bernardino’s residential grid dates from the 1940s through the 1970s. That means detached garages, alley access, and long side driveways secured by gates that have outlasted two or three owners. The original wrought iron and chain-link from that era is thick steel, but decades of 100-degree summers and Santa Ana wind events have done real damage. We see posts that have settled six inches out of plumb in the dry, shifting soil. We see hinge barrels worn oval from gates sagging for years without adjustment. And we see wooden gates that split down the stile because the Inland Empire heat dries them faster than any sealant can protect.
In neighborhoods across 92404 and 92405, gates sit along alley-facing side yards where the ground is rarely compacted properly. Heat-driven post movement means a gate that closed cleanly in May will drag by September. Repair here is as much about re-setting posts and re-plumbing the frame as it is about replacing hardware. If you’re a homeowner in 92401 or 92410, you’ve probably noticed the same thing: the gate worked fine for years, then one summer it stopped latching.
Permits are not typically required for like-for-like gate hardware replacement in San Bernardino, but any new installation that changes driveway access or adds an automatic operator should be checked against current city requirements. We handle that conversation as part of the install, so you don’t have to chase down planning counter hours.
Styles & brands we work with
Our Main San Bernardino Services
The two calls we get most from San Bernardino homeowners are straightforward: a gate that won’t open or close properly, and an electric operator that’s gone dead. Here’s what each one actually involves here.
Gate Repair in San Bernardino
Most repair calls in San Bernardino involve the same culprits: settled posts, rusted hinge welds, bent latch bars, and frames pulled out of square by years of ground movement. On older wrought-iron gates from the 1950s and 60s, the steel itself is usually sound, it’s the hardware around it that failed. We cut out rusted hinge plates, re-weld and re-set posts in compacted fill, and bring the latch geometry back so the gate actually catches. This is the service homeowners call when the gate drags on the concrete or won’t stay closed. Gate Repair in San Bernardino covers the full scope, from minor alignment to full frame restoration.
Electric Gate Repair in San Bernardino
Electric operators in San Bernardino fail differently than the gates themselves. Heat kills control boards. Santa Ana dust gets into limit switches and photo eyes. Ground shifts put the gate out of travel, so the operator strains against a misaligned track every cycle until the motor burns out. We trace the fault, board, loop, motor, or wiring, and fix the actual cause rather than resetting a breaker and hoping. That diagnostic discipline matters on automatic gates, where a misdiagnosed sensor can leave the gate closing on a car. Electric Gate Repair in San Bernardino covers operators, safety loops, and control board work across LiftMaster, FAAC, BFT, and Linear.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Bernardino
New gate installation in San Bernardino almost always starts with the post layout rather than the gate itself. The soil here is dry, uncompacted fill in many older neighborhoods, and heat expands the ground enough to move posts every summer. We set posts deeper than code minimum, pack the fill in lifts, and build the frame square against the driveway grade, not the fence line. That’s the difference between a gate that opens clean for fifteen years and one that starts dragging in its second summer. Whether you’re securing a long alley-access driveway in 92404 or replacing a rotted wooden gate on a 1950s side yard, the job starts with the ground. Montclair Gate Repair has served San Bernardino since 2013, and our Gate Installation work covers the entire process from post set to final latch adjustment.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a gate on a long driveway, or you need controlled access that a manual gate can’t provide.
What it costs in San Bernardino
Automatic gate installation in San Bernardino typically ranges from $2,800 to $9,000 depending on the gate size, operator capacity, and whether new wiring needs to be trenched to the house panel.
How we do it
We survey the driveway grade and post condition, set or reinforce the posts, mount the operator, run conduit and wire, install safety edges and photo eyes, then program travel limits and test obstruction reversal.
Driveway Gate Installation
Signs you need it
Your current gate sags, drags, or no longer closes, and the frame is beyond repair, or there’s no gate at all on a long driveway that needs securing.
What it costs in San Bernardino
Driveway gate installation in San Bernardino typically falls between $1,800 and $6,000 depending on gate width, material, and whether new posts or concrete work are needed.
How we do it
We measure the opening and grade, set posts in compacted fill with concrete collars, hang the gate on adjustable hinges, weld or bolt the frame to fit, and set the latch for positive engagement.
Sliding Gate Installation
Signs you need it
Your driveway is too steep for a swing gate, or you need a gate that slides along the fence line because a swinging gate would block the driveway or hit a slope.
What it costs in San Bernardino
Sliding gate installation in San Bernardino typically ranges from $2,500 to $8,000 including the track, rollers, gate frame, and concrete pad work.
How we do it
We pour or verify a level track pad, set the track and roller hardware, build the gate to the measured opening, hang it on the trolley system, and align the guide rollers so it rolls without binding.
What Gate Installation Costs in San Bernardino
| Item | Typical range in San Bernardino |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $4,500 |
| Automatic gate operator package | $2,800 – $9,000 |
| Sliding gate with track system | $2,500 – $8,000 |
How long does gate installation take in San Bernardino?
Most manual gate installations take one full day including post setting and concrete cure time for the latch area. Automatic operators add a second day for wiring, programming, and safety device testing, especially on older San Bernardino lots where the panel is on the house and conduit has to cross a long driveway.
Do you handle the permits for a new gate in San Bernardino?
We verify current city requirements before any installation that changes access or adds an automatic operator. Most like-for-like replacements don’t need a permit, but anything involving new electrical service or a gate across a public alley easement gets checked first so you’re never surprised later.
Brands We Service in San Bernardino
We work on LiftMaster, FAAC, BFT, and Linear operators, plus five other major brands, covering the range from residential Mighty Mule units to commercial DoorKing and Viking systems. We keep common control boards, limit switches, remote transmitters, and hinge hardware on the truck for same-visit repairs on most San Bernardino jobs. See our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Bernardino, CA
| Service | Typical range in San Bernardino |
|---|---|
| Gate repair, general | $150 – $450 |
| Electric gate repair | $200 – $600 |
| Manual driveway gate installation | $1,800 – $4,500 |
| Automatic gate installation | $2,800 – $9,000 |
| Sliding gate installation | $2,500 – $8,000 |
Prices in San Bernardino run toward the higher end of those ranges on jobs where posts have settled and need re-setting in the city’s dry, shifting soil. Santa Ana wind damage and rusted vintage iron also add labor time. Whatever the number, it’s quoted and agreed before any work starts.
Neighborhoods We Serve in San Bernardino
We work across the entire San Bernardino valley floor and the surrounding hillsides, from the older 92404 and 92405 grid to the 92410 corridor and up into 92401. Most jobs get a same-day or next-day visit depending on the season.
- 92404 – Arrowhead, Perris Hill
- 92405 – Kendall, Cajon
- 92410 – Valley College
- 92401 – Downtown, Lytle Creek
- 92407 – Verdemont, North San Bernardino
Service Area – Cities Near San Bernardino
We also serve the surrounding Inland Empire communities. If you’re in Muscoy, CA with a chain-link gate off a dirt alley, Highland, CA with an automatic driveway operator, or Loma Linda, CA with a commercial access gate, the same technicians cover those routes. Rialto, CA homeowners call us for gate hinge and post work on older tract homes too. One company across the whole area means consistent parts and consistent service.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bernardino
Yes. We cover every San Bernardino ZIP from 92401 downtown through 92404, 92405, 92407, and 92410, plus the surrounding cities. Same-day visits are common for repair calls, and installation estimates are scheduled around your availability.
Less common than manual gates, but they’re gaining ground as homeowners secure long driveways and rental properties. Older San Bernardino lots often need a new dedicated circuit run from the house panel to the operator, which is part of the installation scope we handle.
Settled posts and misaligned hinges from the city’s dry, heat-affected soil. A gate that worked for years will suddenly drag or stop latching because the post has drifted a half-inch. Re-setting the post and re-hanging the gate fixes it permanently without buying new.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bernardino Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Alejandro Herrera"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Amanda Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Terrence Grant