Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland, CA
Gate installation in Highland, CA typically runs $1,600 to $8,200 for a standard residential driveway gate, with wide custom gates for horse properties and large lots reaching $12,000 or more. Most Highland homes we work on were built between the 1950s and 1980s, so the original gates are often heavy wrought iron or solid wood that need custom fabrication rather than an off-the-shelf replacement from a big-box store. If your gate is sagging, dragging, or no longer closes square, call us at (866) 371-3309 for a free estimate.
Why Highland Homes Are Different
Highland sits right at the base of the San Bernardino Mountains, and that foothill location shapes nearly every gate job we take here. The lots are big: quarter-acre is common, half-acre and larger horse properties are everywhere off Base Line and Greenspot Road, and that means driveway gates in Highland are wide, heavy, and often built to clear horse trailers or RVs. A standard pedestrian gate is rare. We’re usually working on a 12 to 16 foot driveway gate, frequently ornamental iron or custom wood, and it has to carry real weight.
The climate does the rest. Hot, dry summers and gusty Santa Ana winds dry out wood until it cracks and warps, while metal gates loosen at the hinges as the wind works them back and forth. Winter rains swell the wood and rust unprotected steel. And the soil out here is sandy loam that shifts when irrigated, which is why so many Highland gates drag on one side while the post on the other side leans. A repair that ignores the post movement won’t hold; we carry concrete and post-setting tools on the truck because we expect to reset at least one post on most Highland jobs.
Older gates in Highland are often original to the home, built from wrought iron or solid wood that you can’t order a direct replacement part for. We fabricate what’s needed to match the existing gate, or build a new gate that fits the same footprint without forcing new post locations.
Styles & brands we work with
Our Main Highland Services
Most Highland homeowners and property managers call us for one of two reasons: a gate that won’t open or close properly, or an electric operator that quit. Here’s what each one involves in this city.
Gate Repair in Highland
A Highland gate repair is usually structural rather than cosmetic. The gate may be dragging across the driveway because a post has shifted in the sandy loam, or the hinges may be wallowed out after years of Santa Ana wind working the gate back and forth. We fix the actual cause, not just the symptom: resetting posts in concrete, welding cracked iron, replacing or rebuilding hinges, and re-hanging the gate so it swings true. For the older wrought iron and wood gates found on 1950s through 1980s Highland homes, we custom-fabricate repair parts instead of forcing an ill-fitting universal bracket. Read more about how we approach these jobs on our Gate Repair in Highland page.
Electric Gate Repair in Highland
Electric gates in Highland work hard: long driveway gates mean bigger operators, and the dust and heat stress control boards and motors. When an electric gate stops responding, we trace the fault through the control board, safety loops, motor, and wiring to find the actual cause instead of swapping parts on a guess. That matters on Highland properties where a gate might be a Mighty Mule opener on a residential driveway or a commercial-grade DoorKing on a multi-unit property. We work on both ends of that range. For a deeper look at how we diagnose and fix automated systems here, see our Electric Gate Repair in Highland page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland
Gate installation in Highland almost always means working around the footprint of an older home and a large lot. Most houses here were built between the 1950s and 1980s, and the original gate, if there is one, is usually heavy wrought iron or solid wood that has outlived its hardware. The dry heat and Santa Ana winds have warped or cracked whatever was there, and the sandy loam soil has likely shifted the posts. A new gate in Highland has to be built for the climate, set on posts that won’t move, and sized for how the property is actually used: horse trailers, RVs, equipment, and daily vehicle traffic. We handle the full Gate Installation from removing the old gate and setting new posts to hanging, adjusting, and, when you want it automated, wiring the operator and safety edges.
Driveway Gate Installation
Signs you need it
Your existing gate drags on the driveway, the hinges are pulling loose, or the frame is split, rusted through, or sagging badly enough that the gate no longer latches.
What it costs in Highland
A standard driveway gate installation in Highland typically runs $1,600 to $4,500, while wide custom gates for horse properties and large lots often fall between $4,600 and $8,200.
How we do it
We measure the opening and check the posts, then fabricate or order a gate sized for your driveway, set posts in concrete if needed, and hang, level, and test the gate for clean movement.
Sliding Gate Installation
Signs you need it
The driveway slopes or the gate swings across too much of the property, and you need a gate that moves parallel to the fence line instead.
What it costs in Highland
Sliding gate installation in Highland typically starts around $3,200 and runs up to $8,200 or more, depending on gate width, weight, and whether an automatic operator is included.
How we do it
We set a concrete track or cantilever foundation, install the rolling hardware, hang the gate so it travels smoothly, and add an operator and safety loops if you want it automated.
What Gate Installation Costs in Highland
| Item | Typical range in Highland |
|---|---|
| Standard driveway gate installation | $1,600 – $4,500 |
| Wide or custom gate installation | $4,600 – $8,200 |
| Full gate installation with operator | $3,200 – $9,200+ |
How long does gate installation take in Highland?
Most standard gate installations in Highland take one to two days from removing the old gate through final adjustment. Custom gates that need fabrication, concrete curing, or operator wiring can push the job to three or four days. We’ll give you a written schedule before work starts.
Does Highland require a permit for a new driveway gate?
Permit requirements in Highland vary by project scope and location; simple like-for-like replacements usually proceed without one, while new electrical work or significant structural changes may need city approval. We’ll check the current Highland requirements for your specific project and handle the paperwork if a permit is needed.
Brands We Service in Highland
We service LiftMaster, DoorKing, Elite, and Mighty Mule operators, among others, and we carry common replacement parts on the truck so many Highland repairs are done in a single visit. When a board or motor isn’t on the shelf, we source it directly from our supplier network. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland, CA
| Service | Typical range in Highland |
|---|---|
| Gate repair, minor (hinge adjustment, latch replacement) | $150 – $350 |
| Hinge replacement or welding repair | $250 – $600 |
| Post reset or replacement | $350 – $900 |
| Gate realignment and re-hang | $200 – $500 |
| Electric gate troubleshooting and minor electrical repair | $150 – $350 |
| Control board replacement | $500 – $900 |
| Gate motor or operator replacement | $700 – $2,500 |
| Safety loop or sensor replacement | $400 – $1,200 |
| Standard driveway gate installation | $1,600 – $4,500 |
| Wide or custom gate installation | $4,600 – $8,200 |
| Full gate installation with operator | $3,200 – $9,200+ |
Two things push prices up in Highland: the weight of the gate itself, which runs heavier on horse properties and large lots, and post work caused by shifting sandy-loam soil. Whatever the number, we quote the full price and get your agreement before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Highland
Highland covers one ZIP code, 92346, and we work the whole city, from the older ranch-style neighborhoods near Base Line to the newer tract developments and the horse properties off Greenspot Road. Response for most repair calls in Highland is same-day or next-day, depending on our schedule that morning.
- Base Line area, including the older ranch homes and horse properties
- Greenspot Road corridor and surrounding equestrian lots
- East Highlands and the neighborhoods toward the foothills
- North Highland, including newer developments and larger lots
- Central Highland, near the 210 corridor
Service Area – Cities Near Highland
We also work the cities around Highland, including San Bernardino, CA, Muscoy, CA, Redlands, CA, and Loma Linda, CA. If you’re just outside Highland in one of these nearby communities, the same crew and the same trucks cover your area.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland
Most Highland gate repair calls are handled same-day or next-day, and for a gate stuck open or unable to close, we treat it as a security issue and prioritize the call. Call (866) 371-3309 and we’ll give you a straight answer on when we can be there.
We work with Highland’s permit office and with local HOAs on gate projects, and we’ll confirm what’s needed before work begins. If your HOA has specific height, style, or material requirements for gates, bring us their guidelines and we’ll build to meet them.
Yes. Most Highland homes we service still have their original gates, and we repair and rebuild wrought iron, steel, and solid wood gates rather than forcing a replacement. When the gate is beyond repair, we can custom-build a new one that matches the original style and fits the same footprint.
Need a gate installed, repaired, or automated in Highland? Call Montclair Gate Repair at (866) 371-3309 for a free estimate. We’ll tell you what’s wrong, what it costs, and what we’d do to fix it, before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Daniel Anderson"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Wade Miller"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Riya Shah