Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redlands, CA
Gate installation in Redlands means accounting for a century of housing styles, intense sun, and soil that rarely sits still. We install automatic driveway gates, sliding gates, and pedestrian gates across 92373, 92374, and 92375, with hardware sized for the property and the operator matched to how you actually use the gate. Montclair Gate Repair has served Redlands since 2013, so we know which installations hold up on a 1920s Craftsman lot and which belong on a newer tract-home driveway. Call (866) 371-3309 for a free estimate on any gate project in Redlands.
Why Redlands Homes Are Different
Redlands’ historic core in 92373 is full of century-old citrus-estate and Craftsman properties whose original wrought-iron and wood picket driveway and garden gates are now a preservation-sensitive repair niche. Owners want operators, hinges, and latches fixed or replicated to match the period rather than replaced with modern steel, which is a different job than the tract-home gate work in neighboring cities. That means sourcing cast-iron hinges, matching wood profile pickets, and often rebuilding a gate leaf around hardware that still has life in it.
Out toward 92374, the stock shifts to mid-century ranch homes and newer subdivisions with builder-grade ornamental steel and vinyl gates. Those gates fail differently: powder coat breaks down under UV, vinyl panels warp in summer heat, and wind loads from Santa Ana events work posts loose on exposed driveways. On the tree-lined streets of the historic district, mature citrus and oak roots heave and shift gate posts, so the real repair is often resetting a leaning post rather than touching the gate itself. Redlands soil, heat, and wind all push against whatever gate you hang, and the fix has to account for all three.
Styles & brands we work with
Our Main Redlands Services
Redlands homeowners call us most often for two problems: a gate that won’t open or close properly, and an electric operator that stopped responding. Both are covered below, with dedicated pages for each.
Gate Repair in Redlands
We fix sagging gates, broken hinges, bent arms, and post failures across Redlands. In the historic district, the job often starts with a leaning post rather than the gate itself. On newer properties, it’s usually a failed weld or a worn hinge. We carry parts for ornamental steel, wood, vinyl, and wrought iron, and we quote the full repair before any work begins. See Gate Repair in Redlands for signs, costs, and how we approach the common failures.
Electric Gate Repair in Redlands
When an automatic gate stops responding in Redlands, the fault is usually in the control board, a safety loop, a motor capacitor, or the wiring between them. We diagnose the system rather than swapping parts on a guess, and we work on LiftMaster, FAAC, BFT, and Linear operators in residential and commercial settings across the city. The full breakdown, including local costs and what to check before you call, is on our Electric Gate Repair in Redlands page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Redlands
Gate installation in Redlands is a site-specific job, not a kit drop-in. The housing stock here spans pre-1920s Craftsman and Victorian homes near downtown to newer subdivisions out toward 92374, and the right gate for a citrus-era lot on a tree-lined street is often a period-appropriate wood or wrought-iron design rather than a modern steel panel. Summer UV degrades wood finishes and vinyl, heat warps lighter metal gates, and Santa Ana winds load hinges and posts hard. So we size the posts for the wind, set them below the root zone where mature trees are close, and match the operator to the gate’s weight and swing rather than overselling horsepower. For a full look at what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close the gate every time you leave or return.
What it costs in Redlands
Automatic gate installation in Redlands typically runs $3,200 – $8,500 depending on gate width, operator brand, and whether we run new power.
How we do it
We measure the gate leaf and post, set or reinforce the posts, mount the operator, run and terminate the power and control wiring, then set travel limits and safety loops before testing full cycles.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through, sagging past the latch, or too narrow for your vehicles.
What it costs in Redlands
A new driveway gate in Redlands, including posts and hardware, typically costs $2,500 – $6,500 before an operator is added.
How we do it
We pull measurements, check the driveway slope and hinge-post depth, fabricate or source the gate to spec, then set it plumb with hardware matched to the gate’s full loaded weight.
What Gate Installation Costs in Redlands
| Item | Typical range in Redlands |
|---|---|
| Driveway gate (manual, materials and labor) | $2,500 – $6,500 |
| Automatic gate with operator | $3,200 – $8,500 |
| Gate operator only (retrofit to existing gate) | $1,200 – $2,800 |
Prices move in Redlands based on gate width, power-run distance, and post condition. Every installation quote is fixed and written before we start, so the number you approve is the number you pay.
Can you install a gate that matches my historic Redlands home?
Yes. We build and source wood picket and wrought-iron gates sized and detailed to match period trim, then fit them with modern operators where needed. The gate looks original, but the hardware is current.
Do you handle the power run for an automatic gate?
We do. On trenching work we coordinate with the utility locate service, run conduit to code, and terminate everything at the operator. In Redlands, long driveways and hardpan soil can add to the run cost, which we quote up front.
Brands We Service in Redlands
We work on LiftMaster, FAAC, BFT, and Linear operators throughout Redlands, and we keep common boards, remotes, and safety-edge parts on hand for faster turnaround. Nine brands. One call. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redlands, CA
| Service | Typical range in Redlands |
|---|---|
| Gate repair (hinge, latch, or wheel replacement) | $150 – $450 |
| Post reset or replacement | $400 – $1,200 |
| Gate operator repair (board, motor, or limit switch) | $250 – $750 |
| Electric gate diagnosis | $90 – $200 |
| Safety loop or sensor replacement | $200 – $600 |
| Gate operator retrofit to existing gate | $1,200 – $2,800 |
| Driveway gate installation (manual) | $2,500 – $6,500 |
| Automatic gate installation with operator | $3,200 – $8,500 |
In Redlands, price climbs when the gate is oversized, the power run is long, or a post has to come out because roots shifted it. Whatever the job, we quote the full amount before we touch anything, and the price you approve is the price you pay.
Neighborhoods We Serve in Redlands
We work all over Redlands, from the historic streets around downtown to the newer subdivisions out toward the 92374 and 92375 edges of the city. Most repair calls get same-day or next-day scheduling.
- South Redlands / Historic District
- Sunset Drive area
- Redlands Heights
- Crafton
- North Redlands / University Grove
Service Area – Cities Near Redlands
Beyond Redlands, we cover the surrounding Inland Empire communities with the same multi-brand service. If you’re in Mentone, CA, Loma Linda, CA, Highland, CA, or Colton, CA, we can usually reach you on the same schedule.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redlands
Most repair calls in Redlands get same-day or next-day scheduling. If the gate is stuck open or won’t close, call us at (866) 371-3309 and we’ll tell you over the phone whether it’s safe to leave it until we arrive or whether you should secure the opening another way.
It depends on the gate’s height, location, and whether it’s automated. Automated gates trigger safety requirements like photo eyes and vehicle detection loops. We’ll tell you what applies to your property before the work is quoted, not after.
We do. Many Redlands HOAs restrict gate height, material, or color. We’ll pull the requirement and build the gate to the spec, then handle the install. If your HOA needs documentation before approving, we provide drawings and material specs on request.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redlands Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Walsh"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Emily Park"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Alejandro Herrera